At Ketaki Air Solutions, we understand that clean, safe, and efficient air quality is essential for both industrial and residential environments. Our comprehensive air management product range is designed to optimize air quality, control temperature, and ensure efficient energy use, catering to a wide variety of needs across sectors.
Clean Room Validation Services
Bio Safety Cabinet
CHW & HW Manifolds
CHW & HW manifolds installed
below the AHU.
Temperature & Rh
Specific Humidity will be measured to
remove moisture content.
Reheat will be occurred if it is an
evident that there is no sensible heat.
Air Flow Control
Air flows will be measured and
controlled through static pressure
across the blower cone.
Chilled Water / Hot Water Flow:
The actual flows of CHW / HW will be measured and displayed.
Cooling TR / Heating Kw:
Cooling and Heating Loads will be
measured and displayed.
Blower Efficiency:
Blower efficiency will be calculated
and displayed.
Co2 Level:
Optional Control
Fresh Air & Bleed Air
FA and BA dampers can be
controlled electronically
Ketaki are highly experienced in the fabrication of Ducting and in the process of redefining the fabrication technology. we believe more in practical applications and less on theory and this actually made it possible for us to standardize the duct sizes as per CFM. Standardization helps fabricate material well in advance and thus helps complete the project withinn the right tie frames.
Ketaki has complied with all the standards in one page and also defined internal standards.
Ketaki can also supply ONLY DUCTS as standalone products
CAPACITY: 1000 cfm - 1,00,000 CFM
APPLICATIONS: Offices, Factories, Food, Machinery Function Halls, Cinema theatres, Restaurants & Shopping Malls... etc.
We make Air Cooling System with Air-condition Effect
All Ducts making with Spiro Germon Machines
Flexible and easy to assemble, it can be installed before or after wall cleanroom installation, sitting on top of the walls or leaving the walls protruding above ceiling, room by room. This kind of false ceiling is made by means of insulation sandwiched between two layers of metal sheets of epoxy powder coating. All sides are closed by frame.
The result is a perfectly smooth and coplanar cleanroom surface that is very easy to clean. The bearing aluminum profile is housed by clicking-in between panels. There is a threaded tension bar, with an adjustment ring, to be fastened to the existing ceiling.
We offer both single and double swing doors, in a variety of sizes. Our doors have rounded profiles, no visible screws, double gaskets, in the frame and in the leaf with automatic drop seal at floor allowing a full tight system.
We provide manual or automatic sliding doors, automatic swing doors.
We offer both single and double swing doors, in a variety of sizes. Our doors have rounded profiles, no visible screws, double gaskets, in the frame and in the leaf with automatic drop seal at floor allowing a full tight system.
We provide manual or automatic sliding doors, automatic swing doors.
18 Gauge CRCA powder coated Riser module single skin provision to fit flange type 20 Micron / 10 Micron filters and provision to fix perforated grill with gear operated damper.
Moc: GI/SS
Type: False Ceiling / Grounding
Sizes : Standard :600X400X150mm 600X600X150, 700X500X50
Customisation is possible as per the requirement
Ketaki on the other hand, usually do not use a fan. These cleaners use a set of ionizing wires to positively or negatively charge air particles.
Collection plates with the opposite charges act as a magnet to trap these charged air particles.
18 Gauge CRCA/GI powder coated Hepa filters terminal module single skin provision to fit Flange/BOX Type HEPA filters and provision to fix perforated grill, up steam and down steam pressure differential ports with gear operated damper.
A major concern with KETAKI is that
Moc: GI/SS
Type: False Ceiling/Grounding
Sizes:
Standard: 610X610, 610X305, 305 X 305
Diffusers are constructed entirely from aluminium alloy extrusions with mitred and cleated frames.
Size: As per clients requirement Square minimum 150X150 duct size maximum 600 X 600 duct size Rectangular-minimum 300 X 150 duct size maximum 1200 X 600 duct size (each dimension increasing in increments of 75mm) 16 SWG Perforated grills of 55304/Aluminium to fix to the supply and return modules.Finish
Standard: Epoxy Polyester Powder coat of white/pure white, other powder coating finishes are available on request.
Types of Diffusers
Continuous Slot Diffusers, Linear Diffusers, Multicore Ceiling Square/Rectangular Diffusers, and all types of diffusers.
Linear grills, single and double deflection blade grilles suitable for duct, ceiling and sidewall applications for most commercial Projects, Grill vanes are individually adjustable to allow jet spread or deflection to be set within 450 of the duct axis.
Description
Manufacture All grilles are constructed from high quality aluminium alloy extrusions with cleated and mitred frames. Vanes in single or double banks are individually adjustable. Blades are held in position with stainless steel spring wire for long life.
Features
Single or double deflection for complete air pattern control
All aluminium construction
Teardrop blade for quiet operation but maximum induction
Screw or concealed fixing
Wide size range.
Efficiency - 90% down to 10 Micron
Media - 100% Washable Synthetic Non-Woven Media
Efficiency - 90% down to 3 Micron
Media - 100% Washable Synthetic Non-Woven Media
Efficiency - 90% down to 3 Micron
Media - Synthetic Non-Woven Media
Efficiency - 90% down to 0.3 Micron
Media - Imported Glass Fibre Media
Efficiency - 90% down to 0.3 Micron
Media - Imported Glass Fibre Media
Efficiency - 90% down to 0.3 Micron
Media - Imported Glass Fibre Media
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Designed with precision, the Reverse Laminar Air Flow is ideal for operator protection, product protection and environment protection. Based on the smooth working profile and high-end performance of our Reverse Laminar Air Flow units it proven for maintaining accuracy of the weighing & other operation unaffected.
Ketaki is a superior manufacturer of Sterile Garments Cubicle used as storing cubicles or cabinets which are used in pharmaceutical cleanrooms for operator gowning and sterile cloths switch storage material and aids in preserving a sense of class between the two regions.
It is used between the two different classified areas.
Technical Specifications
A dynamic pass box is a cubicle box that has interconnected doors located on both sides. This prevents contaminaon of the monitored environment when the material is being transferred within
Controls & Equipment's has been a pioneer in the development of paperless data acquisition systems for over 15 years. The utilization of state of the art technologies to develop intelligent, powerful and intuitive products has made DL-35W a product line competitive to global leader in paperless recording technology.
The DL-35W is the most advanced paperless recording system available.
It incorporates the latest in measurement, communication, interface and processing technologies to deliver unmatched performance for your data acquisition application.
The DL-35 is like no other paperless recorder available. We listened carefully to our product users and developed a device with the unique features they demanded.